Ifowuni: +86 21 3130 0557
MOFAN

iimveliso

Umfanekiso obonisiweyo we-Tin(2+) neodecanoate
  • I-tin(2+) neodecanoate
  • I-tin(2+) neodecanoate
  • I-tin(2+) neodecanoate

I-tin(2+) neodecanoate

  • IBanga le-MOFAN::I-MOFAN T-900
  • Uphawu loMkhuphisani::I-T-900
  • Igama lekhemikhali::I-tin(2+) neodecanoate
  • Inombolo yeCas::49556-16-3

    • Iinkcukacha zeMveliso

    Iithegi zeMveliso

    Inkcazo

    I-MOFAN T-900 isebenza njengesihluzi sesinyithi esitshintsha i-octoate. Inika umsebenzi ofanayo kunye nokusetyenziswa okufanayo
    amanqanaba kunye nokuphathwa kwezinto ukuya kwi-stannous octoate. Ingasetyenziswa kunye nee-co-catalysts zesiqhelo ezisekwe kwisinyithi, njenge
    kunye ne-tertiary amine yendabuko okanye ii-non-fugitive amine catalysts.

    Isicelo

    I-MOFAN T-900 iyacetyiswa ukuba isetyenziswe kwiinkqubo ze-TDI okanye ze-TDI/MDI slabstock polyurethane foam, ezivuthuzwa ngamanzi, okanye ezivuthuzwa yi-CO2.
    I-MOFAN T-900 ingaxutywa ngee-polyols, njengomlinganiselo we-1:10. Ezi premixes zifanele zisetyenziswe ngokukhawuleza, kungcono ukuba zisetyenziswe ngosuku olufanayo.
    Inqanaba lokusetyenziswa elicetyiswayo le-MOFAN T-900 liphakathi kwe-0.1 ukuya kwi-0.3 pphp kwi-ether foam eqhelekileyo kunye ne-0.1 kunye ne-0.25 pphp kwi-hot cure molded foams. Uxinzelelo olufanelekileyo luya kuxhomekeka kwiinkcukacha zefomyula kunye nezinto eziluhlaza.

    图片25
    图片26

    Iipropati eziqhelekileyo

    Inkangeleko Ulwelo oluMthubi oKhanyayo
    Umxholo wetin (Sn), % ≥19
    Ukuxinana kwi-25 °C, mPa*s 700

    Iinkcukacha zorhwebo

    Inkangeleko Ulwelo oluMthubi oKhanyayo
    Umxholo wetin (Sn), % ≥19
    Ukuxinana kwi-25 °C, mPa*s 700

    Iphakheji

    25kg/idrama okanye ngokweemfuno zabathengi.

    Iingxelo zengozi

    Inokuba yingozi xa iginyiwe. Ibangela ukurhawuzelelwa kwesikhumba.
    Ibangela umonakalo omkhulu emehlweni.

    Izinto zeleyibhile

    2

    Iifotogram

    Igama lesignali Isilumkiso

    Ayilawulwa njengempahla eyingozi.

    Ukuphatha kunye nokugcina

    Nika umoya ococekileyo kwindawo yokusebenza (umoya ophumayo kwindawo ethile ukuba kuyimfuneko). Kuphephe ukudibana nolusu namehlo. Musa ukuphefumla iigesi/umphunga/ii-aerosols.
    Gcina izikhongozeli zivalwe kakuhle kwindawo epholileyo, enomoya ococekileyo. Gcina kuphela kwisikhongozeli sokuqala.

    FAQ

    Ndivelisa igwebu eliguquguqukayo kwaye ndifuna i-catalyst yetin enozinzo olungcono lwe-hydrolytic kune-T-9. Ngaba i-T-900 yisisombululo?

    Ewe, i-stannous neodecanoate ayichukumisi kangako ukufuma, nto leyo enika uxinano oluhambelanayo lwefoam kunye nokuqhekeka okuncinci.

    I-polyurethane coating yam yangaphakathi yeemoto ifuna i-VOC ephantsi. Inceda njani i-T-900?

    Inokuguquguquka okuphantsi kune-T-9 kwaye ayincedi ekuguguleni.

    Ngaba i-T-900 ingasetyenziswa kwi-foam eguquguqukayo enamanzi amaninzi (6 phr) ukuthintela ukutsha?

    Ewe, umsebenzi wayo ophantsi unciphisa i-exotherm yangaphakathi; sebenzisa i-0.2–0.3 phr kunye nee-antioxidants ezifanelekileyo.

    Ingakanani i-tin esemgangathweni ye-T-900?

    ~24% yetin (stannous); ingaphantsi kancinci kune-T-9 kodwa izinzile ngakumbi.

    I-elastomer yam (enokuphoswa) inemingxuma ngenxa yokufuma. Ngaba ukutshintshela kwi-T-900 kuya kuyisusa?

    Iyanciphisa ubuthathaka bokufuma kodwa isafuna izinto ezomileyo; ikhupha igesi ngokupheleleyo.

    Ngaba i-MOFAN T-900 ifanelekile kwii-polyurethane sealants ezisetyenziswa kwiindawo ezifumileyo?

    Ewe, ingcono kune-T-9 kwiinkqubo zokukhusela umswakama ezinecandelo elinye; inika ixesha elide lokuhlala ixesha elide.

    I-T-900 ithelekiswa njani ne-T-900?

    Ukutshintshwa ngokuthe ngqo; umsebenzi ofanayo kunye nozinzo.

    Ifoam yam ekwaziyo ukumelana nezifo ngokukhawuleza ibuyela umva kancinci emva kokucinezelwa. Ngaba i-T-900 ingakuphucula ukunyamezela?

    Kuphela kancinci; ukuqina komzimba kuphenjelelwa ngakumbi kukukhetha i-polyol kunye ne-isocyanate.

    Ingakanani iqondo lobushushu elicetyiswayo lokugcina i-T-900?

    10–30°C; musa ukuyiqandisa; isenokunyibilika ngaphantsi kwe-5°C; ifudumale ukuya kuma-25°C ngaphambi kokuba uyisebenzise.

    Ngaba i-T-900 ingasetyenziswa kwi-polyurethane rigid foam ukuze i-continuous lamination ihlale isetyenziswa?

    Ewe, kodwa ayixhaphakanga kangako; ii-amines kunye nee-trimer catalysts ziyathandwa; sebenzisa i-T-900 kwi-0.1–0.2 phr njenge-co-catalyst.

  • Ngaphambili:
  • Okulandelayo:
    • Bhala umyalezo wakho apha uze uwuthumele kuthi

    iimveliso ezinxulumene noko

    Shiya umyalezo wakho